BNPRR - PLASTIC PORCELAIN (POWDER) NO 30

  • MSDS: BNPRR
  • Manufacturer: SAUEREISEN CEMENTS COMPANY
  • Product Name: PLASTIC PORCELAIN (POWDER) NO 30
  • National Stock Number: 8040-00-781-8835
Product Identification

Product ID:PLASTIC PORCELAIN (POWDER) NO 30
MSDS Date:05/01/1990
FSC:8040
NIIN:00-781-8835
MSDS Number: BNPRR

Responsible Party
SAUEREISEN CEMENTS COMPANY
160 GAMMA DRIVE
PITTSBURGH, PA 15238
US

Emergency Phone: 412-963-0303

Info Phone: 412-963-0303

Cage: 80703

Contractor
SAUEREISEN CEMENTS COMPANY
PITTSBURGH, PA 15238 US

Telephone: 412-963-0303

Cage: 80703

Ingredients

SILICA, CRYSTALLINE - QUARTZ; (SILICA)

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT)>4000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:DUST MAY DEHYDRATE MUCOUS
MEMBRANE-REPEATED INHAL OF RESPIRABLE FREE DUST MAY CAUSE
INDUSTRIAL BRONCHITIS OR DELAYED LUNG INJURY, (SILICOSIS). INHAL:
DUST MAY BE VERY SLIGHTLY IRRITATING; NOT A SERIOU S PROBLEM. MAY
CAUSE CATHARSIS OR VOMITING.
Explanation of Carcinogenicity:CRYSTALLINE SILICA: GROUP 2A(IARC),
ANTICIPATED TO BE A CARCINOGEN(NTP).
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: FLUSH IMMED WITH WATER OR PHYSIOLOGICAL SALINE FOR @
LEAST 15 MIN. GET MED ATTN. SKIN: WASH CONTACT AREA THORO WITH SOAP
AND WATER. REMOVE CONTAMINATED CLOTHING. LAUNDER BEFORE REUSE.
INHAL: REMO VE TO FRESH AIR @ ONCE. APPLY ARTF RESPIF BREATHING HAS
STOPPED. GET MED ATTN. INGEST: LOW IN TOX. INDUCE VOMIT IF LARGE
AMOUNTS ARE INGESTED. GET MED ATTN.

Fire Fighting

Extinguishing Media:WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .

Accidental Release

Spill Release Procedures:SWEEP, SCOOP OR VACUUM DISCHARGED MATERIAL.
NIOSH/MSHA APPROVED RESPIRATORY PROTECTION SHOULD BE WORN @ ALL
TIMES & SKIN CONTACT AVOIDED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED DUST RESPIRATORS IN
COMPLIANCE WITH OSHA STANDARD 1910.134.
Ventilation:NORMAL VENTILATION FOR GOOD WORKING CONDITIONS SHOULD BE
USED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Other Protective Equipment:SAFETY SHOWER AND EYEWASH STATION SHOULD BE
WITHIN DIRECT ACCESS.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:307F,153C
Spec Gravity:2.65
Solubility in Water:<20%
Appearance and Odor:WHITE, ODORLESS POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:AVOID DAMPNESS.
Hazardous Decomposition Products:NONE.

Disposal

Waste Disposal Methods:MATL CHOULD BE DISPOSED OF IN APPROVED LANDFILL
ACCORDING TO FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.